![]() The following features work with Mesh based parts in Inventor 2017. To split a Mesh file which contains multiple shells into multiple Mesh bodies in Inventor, tick the ‘Split Group’ option in mesh import. Pro tip: Splitting OBJ Groups into individual meshes In an Assembly file, Inventor can use these edges to create Joint and Constraint relationships between regular and mesh based parts. Tip: Don’t forget to click on the ‘Options Button’ during export to set the quality of your mesh! Assemble Join and Constrain mesh partsĪutodesk Inventor 2017 uses some really clever programming to analyse the edges and faces of your mesh based. You can also navigate to the Application menu (The ‘File’ tab under the big Orange ‘I’) and select: You can save OBJ files directly out of Inventor using the save command, and setting the file type to OBJ. Tip: Don’t forget to click on the ‘Options Button’ during import! You can also Import OBJ files by clicking on:ģD Model tab > Create Panel > Import Tool. Note: This functionality supersedes the Autodesk Mesh enabler tool (Click the link to read more). ![]() You can now open OBJ files directly using the ‘Open’ command and switching to ‘OBJ’ file type. While we can’t create a drawing from a Mesh file (yet!) Inventor 2017 does have an entirely new toolset for building Surface or Solid models from Meshed bodies. Mesh based files can be used in a BOM directly with no further editing, and we can even use mesh based files in assemblies with constraints! ![]() OBJ mesh files directly into inventor and use them in our workflow. Hope this helps.New in Autodesk Inventor 2017, Awesome Mesh support! Autodesk Inventor 2017 enables end to end round tripping of scanned to 3D printed data by enabling Mesh based models.Īutodesk Inventor 2017 brings new features for those of us interested in working with scanned data or 3D printed files in the form of its new Mesh file modelling tools. Keep in mind I believe it keeps as a default when you change that and you may have to go back and return it to whatever units you normally save in. stl file single select the file you want to open so it is highlighted and down at the bottom there is an Options button, click that and it opens a window, under Units there is an Import Units button, switch that to mm or in depending on how your file was saved out originally. Evan, What I did is when you go to open your. stl was open, I click on the part, then right click, select Convert to Base Feature, I selected output to solid, OK and it was done and worked correctly.Įvan, What I did is when you go to open your. stl came in fine and matched what the customer had. So it sees the 12 as the value and the import doesn't know or care what it is but as soon as I changed my import option to mm the. The customer exported in mm and I imported in inch. I opened a customer model and it looked correct until I made a measurement and it was 12" the real measurement was 0.473 or 12mm. ![]() stl file (inch or mm) when opening the file and change it in your options to match before opening it to keep it at the correct values. Make sure you know what your units are of the. This next comment doesn't really have anything to do with how the Mesh Enabler works other than how you import then use the Enabler: Seems to work fine now after Rocky fixed it up.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |